The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth.
Victron Blue Power and Blue Smart IP65 Battery Chargers
6V/12V 1.1A, 12V 4/5/7/10/15/25A, 24V 5/8/13A
With built-in Bluetooth.
Allows recovery of deeply-discharged 'dead' batteries
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
for the latest prices and delivery information please contact us
Telephone: 0333 090 4007
For more information about this product, to check delivery times or to find out about having this product installed please give us a call on the number above or please drop us an email at mail@karasolar.co.ukProduct Variations:
Victron Blue Smart IP65 Charger12V 7A 230V UK |
Victron Blue Smart IP65 Charger 12V 15A, 1 output |
Victron Blue Smart IP65 Charger 24V 8A, 1 output |
Installation Service Available:
Solar Carports and Canopies Installed Across the UKSolar Panels & EV Chargers Installed Across South-West England.For an informal chat or a formal quote please do contact us.Efficient Battery Charging
Victron Blue Power and Blue Smart IP65 Battery Chargers
With built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. With up to 94 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Victron Blue Power and Blue Smart IP65 Battery Chargers
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth Smart
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Ultra high efficiency ‘green’ battery charger
With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Durable, safe and silent
• Low thermal stress on the electronic components.
• Protection against ingress of dust, water and chemicals.
• Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail.
• The chargers are totally silent: no cooling fan or any other moving parts.
Reconditioning
A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.
Recovery function for fully discharged batteries
Most reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Smart IP65 Charger however will
attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.
Installation Service
available across the south-west
KaraSolar can offer a complete installation and maintenance service for Solar PV Systems, EV Chargers, Wind Turbines and Solar Carports. We can supply and install all that is required for on/off-grid systems and from small domestic systems to large commercial solar generation projects.
Our professional, polite, friendly and helpful team can work with you to ensure you not only get the system to match your exact requirements but that every step of getting your system installed is monitored and cared for by your own project manager. For an informal chat or a formal quote please do get in touch.
Victron Blue Power and Blue Smart IP65 Battery Chargers
Specifications
Electrical Data:
Blue Smart IP65 Charger |
6 V/12 V - 1.1 A |
12 V 4/5/7/10/15/25 A |
24 V 5/8/13 A |
Input voltage and frequency range |
100 - 250VAC | 45 - 65Hz |
230 VAC |
|
Efficiency |
82% |
94% |
95% |
Standby power consumption |
<0,5 W |
0,5 W |
|
Minimum battery voltage |
Starts charging from down to 0 V |
||
Charge voltage 'absorption' |
Normal: 7,2 V | 14,4 V High: 7,35 V | 14,7 V Li-ion: 7,1 V | 14,2 V |
Normal: 14,4 V High: 14,7 V Li-ion: 14,2 V |
Normal: 28,8 V High: 29,4 V Li-ion: 28,4 V |
Charge voltage 'float' |
Normal: 6,9 V | 13,8 V High: 6,9 V | 13,8 V Li-ion: Disabled |
Normal: 13,8 V High: 13,8 V Li-ion: 13,5 V |
Normal: 27,6 V High: 27,6 V Li-ion: 27,0 V |
Charge voltage 'storage' |
Normal: 6,6 V | 13,2 V High: 6,6 V | 13,2 V Li-ion: 6,75 V | 13,5 V |
Normal: 13,2 V High: 13,2 V Li-ion: 13,5 V |
Normal: 26,4 V High: 26,4 V Li-ion: 27,0 V |
Charge current |
1.1 A |
4 / 5 / 7 / 10 / 15 / 25 A |
5 / 8 / 13 A |
Low current mode |
0,5A |
2 / 2 / 2 / 3 / 4 / 10 A |
2 / 3 / 4 A |
Temperature compensation (lead-acid batteries only) |
8 mV/°C | 16 mV/°C |
16 mV/ºC |
32 mV/ºC |
Power supply mode |
Yes |
||
Back current drain |
0,1 Ah/month (140uA) |
0,7 Ah/month (1 mA) |
|
Protection |
Reverse polarity, Output short circuit, Over temperature |
||
Operating temp. range |
-30 to +50°C (full rated output up to 30°C) |
-40 to +60°C (full rated output up to 30°C) (cables retain flexibility at low temperature) |
|
Humidity (non-condensing) |
Max 95% |
||
Charge algorithm |
7-stage adaptive |
||
Bluetooth |
-4dBm, 2402 – 2480 MHz |
Dimensions:
Dimensions (h x w x d) |
|
6 V/12 V - 1.1 A |
38 x 64 x 153 mm |
IP65s 12 V 4/5 A |
45 x 81 x 182 mm |
IP65 12 V 7 A 24 V 5 A |
47 x 95 x 190 mm |
IP65 12 V 10/15 A 24 V 8 A |
60 x 105 x 190 mm |
IP65 12 V 25 A 24 V 13 A |
75 x 140 x 240 mm |
Enclosure:
Battery connection |
Black and red cable of 1,5 meter |
|
230 VAC connection |
1.5m cable with CEE 7/16 or |
Cable of 1,5 meter with CE 7/16, CE 7/17, BS 1363 plug (UK) |
Protection category |
IP65 (splash and dust proof) |
Standards & Warranty:
Safety |
EN 60335-1, EN 60335-2-29 |
Emission |
EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
Immunity |
EN 55014-2,EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
Warranty |
5 years warranty, upgradable to 10 years for additional 10% of purchase price. |
Victron's Warranty and Global Support
Victron Energy offers 5 years standard warranty on power products*. This is upgradable to 10 years by an additional 10% of the initial investment.
After decades of mastering power challenges with innovation, Victron know how to create a wide range of robust connected products that keep performing, even in the harshest of climates. This combined with their standard 5 year warranty will provide peace of mind for years to come. And if things go wrong, be assured that our fast and fair repair services offered through our worldwide network of dealers are by your side.