Victron SmartSolar MPPT
150/45 up to 250/70
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
Victron SmartSolar Charge Controller
MPPT 150/45 up to 250/70
Available in 12, 24, 36 & 48 Volt
Ultra-fast Maximum Power Point Tracking (MPPT)
The wireless solution to set-up, monitor, update and synchronise
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
This Victron Blue Solar Charge Controller supports a PV input with a maximum open circuit voltage of 150V to 250V and has a maximum output of between 45A and 75A. It works with and will automatically recognise 12V, 24V and 48V battery systems (36V also possible via software configuration).
for the latest prices and delivery information please contact us
Telephone: 0333 090 4007
For more information about this product, to check delivery times or to find out about having this product installed please give us a call on the number above or please drop us an email at mail@karasolar.co.ukProduct Options:
Available with 35 mm² screw terminals (TR) or 3 sets of MC4 connectors (MC4)
SmartSolar MPPT 60A 150V (TR)
SmartSolar MPPT 60A 150V (MC4)
SmartSolar MPPT 70A 150V (TR)
SmartSolar MPPT 60A 250V (TR)
SmartSolar MPPT 60A 250V (MC4)
Installation Service Available:
Solar Carports and Canopies Installed Across the UKSolar Panels & EV Chargers Installed Across South-West England.For an informal chat or a formal quote please do contact us.Victron BlueSolar and SmartSolar MPPT Charge Controllers
Victron SmartSolar Charge Controller
MPPT 150/45 up to 250/70
Feature highlights common to all models
• Ultra-fast Maximum Power Point Tracking (MPPT).
• Advanced Maximum Power Point Detection in case of partial shading conditions.
• Outstanding conversion efficiency.
• Natural convection cooling.
• Automatic battery voltage recognition.
• Flexible charge algorithm.
• Over temperature protection and power derating when temperature is high.
Victron SmartSolar Charge Controller
MPPT 150/45 up to 250/70
Bluetooth Smart Built-In
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in Case of Partial Shading Conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding Conversion Efficiency
No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).
Flexible Charge Algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive Electronic Protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal Temperature Sensor
Compensates absorption and float charge voltage for temperature.
Optional External Battery Voltage and Temperature Sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully Discharged Battery Recovery Function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
Installation Service
available across the south-west
KaraSolar can offer a complete installation and maintenance service for Solar PV Systems, EV Chargers, Wind Turbines and Solar Carports. We can supply and install all that is required for on/off-grid systems and from small domestic systems to large commercial solar generation projects.
Our professional, polite, friendly and helpful team can work with you to ensure you not only get the system to match your exact requirements but that every step of getting your system installed is monitored and cared for by your own project manager. For an informal chat or a formal quote please do get in touch.
Victron SmartSolar Charge Controller
MPPT 150/45 up to 250/70
Specifications
Electrical Data:
SmartSolar MPPT |
150|60 |
150|70 |
Battery voltage |
12 / 24 / 48V Auto Select |
|
Rated charge current |
60 A |
70 A |
Nominal PV power, 12V |
12V: 860W / 24V: 1720W / 36V: 2580W / 48V: 3440W |
12V: 1000W / 24V: 2000W / 36V: 3000W / 48V: 4000W |
Maximum PV open circuit voltage |
150V absolute maximum coldest conditions |
|
Max. PV short circuit current |
50A (max 30A per MC4 conn.) |
|
Maximum efficiency |
98% |
|
Self-consumption |
Less than 35mA @ 12V / 20mA @ 48V |
|
Charge algorithm |
multi-stage adaptive (eight pre-programmed algorithms) |
|
Temperature compensation |
-16 mV / -32 mV / -64 mV / °C |
Enclosure:
Colur |
Blue (RAL 5012) |
|
Power terminals |
35 mm² / AWG2 (Tr models) |
|
Protection category |
IP43 (electronic components), IP22 (connection area) |
Dimensions:
Height |
185mm (TR) 215mm (MC4) |
Width |
250mm |
Depth |
95mm |
Weight |
3kg |
Additional Info:
Protection |
PV reverse polarity |
|
Operating temperature |
-30 to +60°C (full rated output up to 40°C) |
|
Humidity |
95%, non-condensing |
|
Data communication port |
VE.Direct or Bluetooth |
Standards & Warranty
Saftey |
EN/IEC 62109-1, UL 1741, CSA C22.2 |
Warranty |
5 Years (upgradable to 10 years) |
Victron's Warranty and Global Support
Victron Energy offers 5 years standard warranty on power products*. This is upgradable to 10 years by an additional 10% of the initial investment.
After decades of mastering power challenges with innovation, Victron know how to create a wide range of robust connected products that keep performing, even in the harshest of climates. This combined with their standard 5 year warranty will provide peace of mind for years to come. And if things go wrong, be assured that our fast and fair repair services offered through our worldwide network of dealers are by your side.